l currently own a Butron Cruzer 05 (160cm)
with large bindings, but my question is if l buy the Burton Elite 07 (150cm) will my bindings still fit? or will l have to get new ones?

The 151 Elite has a waist width of about 242mm.. where as ur current board, a 160 Cruzer, has a width of 256mm. If u r using Large bindings, these might be a tad on the small side for 151 that is not a wide board.

You have to consider a few things when choosing a board. What is ur shoe size (this will determine if u should be in a Wide board)? How much do u weigh? If u weight too much for the board u will bend the board too much, thus wearing it out sooner & not going as fast as u could. You also need to consider what is ur style & level of snowboarding?

You might want to reconsider going up in size of ur board, possibly to a 155 or even a 158, especially since u were originally in a 160. But without the above stats it is hard to tell which board to go into. Ask ur local ski/snowboard shop. They should be able to get u in the right gear.

probably. if ur bindings fit 1 burton board chances are they will fit all burton boards. the only problem l could think of is if the new board is not wide enough for the bindings. try measuring ur board then the board ur considering. if the elite is considerably more narrow than ur cruzer, then the board probably is not wide enough 4 ur bindings

The bolt patterns will fit, for sure. 10 cm is a pretty big jump, take you're bindings to ur local shop & see how it looks. l am 6'3'' & have always had toe-drag problems. l ride a crazy, duck-foot stance & use risers (gas pedals) to help, also, all snowboard boots r ''beveled'' if u notice which helps as well.

On a side note, l think it is rad that Burton has brought back the Elite & Cruzer, my first board ever was a dove-tailed Elite & l still have my ol' school Cruiser with the back-pack-like straps & the fixed highbacks.